Profile 440 Plinth Block

Description

PLEASE NOTE Plinth Blocks ARE NOT compatible with Hockey Sticks

DIMENSIONS Our Plinth Blocks are available in a wide range of heights, widths and depths. We also offer custom sizes for no extra cost.

HEIGHT Our Profile 440 Plinth Blocks are available in 8 different standard heights ranging from 140mm – 320mm.

WIDTH Our Profile 440 Plinth Blocks are available in 140mm widths.

DEPTH Our Profile 440 Plinth Blocks are available in 15mm, 18mm, 25mm and 30mm depths.

FINISHES We offer a wide range of finishes.

UNPRIMED No white primer has been applied (i.e. raw MDF). Product will require a primer coat before any finish is applied.

PRIMED Two coats of primer is applied during this process with sanding in between coats. Product will require a final paint finish.

GLOSS Two coats of primer is applied as well as one coat of gloss paint leaving a hard and shiny finish.

SATIN Two coats of primer is applied as well as one coat of satin paint* leaving a matt/gloss finish.

EGGSHELL Two coats of primer is applied as well as one coat of eggshell paint leaving a matt finish.

FREE SAMPLE Order up to 3 free samples which will be sent out via 1st Class Royal Mail.

MOULDING All Plinth Blocks are available with an option to have them moulded with a 5mm edge or a plain square edge. *  *  EDGE *  A 5mm edge is moulded to the face of the block at a 45 degree angle (please note this will reduce the depth of block by 5mm) *  *  SQUARE *  No moulding is applied to the face of the block. Ideal for same depth architrave to leave a flush finish. *  *